AMR Industries, Inc. - Item # Data Sheet, AMR 1165
Contact Us Today: (818) 834-4480 | Email:info@amrindustriesinc.com   
AMR Industries, Inc.
Adhesives :: Adhesives :: Coating :: Electrically Conductive :: Elastic :: Epoxy :: High Temperature :: Military Specification :: Polyurethane :: SMD :: Thermal Cure :: Thermally Conductive :: Dispensers :: Adhesives Mixers Syringes Kahnetics
 Search Catalog
      GO   
 All Categories    Polyurethane Adhesives
All Categories > Adhesives > Polyurethane Adhesives > Item # Data Sheet  
    Print Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Item # Data Sheet AMR 1165



    Email Email This Page  
    Save To Favorites Save To Favorites
  

Product Image - Thermally Conductive Adhesives

larger image
This compound is a low viscosity, thixotropic, polyurethane adhesive for use between -150 °F and +200 °F.

HANDLING :

  • Viscosity (after thaw), 25 °C - Thixotropic
  • Apparent Viscosity (after thaw), 25 °C, cps - 7000
  • Pot Life (after thaw, 3cc Syringe) at 25 °C, minutes - 20
  • Shelf Life at -40° or lower, days - 21
  • Full cure at 25 °C, hours - 24
  • Full Cure at 70 °C, hours - 4
    Allow 72 hours at 25 °C after cure before testing properties.
    Cleaning of equipment, etc. can be done with MEK, Toluene or other industrial solvents.
    Premixed & Frozen materials is non-hazardous and does not require MSDS.

    DISCLAIMER :
    All statements, technical information and recommendations contained herein are based on tests we believe to be accurate, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of warranty express or implied: Seller and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective; neither seller or manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising from the use or inability to use the product. Before using, user shall determine the suitability of the product for his intended use, and user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force or effect unless in agreement signed by the offices of seller and manufacturer.



  •  Specifications  

    Color

    Green

    Dielectric Strength (0.250 thk)

    300 V/m

    Elongation at Break, 25°C (%)

    200

    Hardness, Shore D

    70

    Lap Shear (Al to Al, FPL etch)

    150
    1200

    Lap Shear (Al to Al, FPL etch, 77°F)

    1500 psi

    Specific Gravity

    1.15

    Tensile Strength (25°C)

    4200 psi

    Volume Resistivity (25°C)

    1012 ohm-cm

    This material is available Frozen in

    1cc, 3cc, 5cc, 10cc & 30cc syringes

    DOT/IATA Shipping Regulations

    Part A = N/A
    Part B = N/A
    Frozen = None (Except Dry Ice, UN1845)

    Request Information